2011 Indy 500 - It's never over until you cross the finish line!

Brit Dan Wheldon takes victory right on the line as rookie J.R.Hildebrand loses the plot on the very last bend - you just couldn't script this finish! Good to see Danica Patrick finishing in the top 10 too.

Bob Decker's mini dirt-racer

How about this great little bike sent in by Bob Decker. Bob describes it as a "speedway/boardtracker" that is "lottsa fun!". It uses a stock simplex frame and parts and has been bobbed and stripped to resemble an old racer. Bob replaced the old 2-stroke engine with a 200cc, 4-stroke continental slant square port engine coupled to a Comet torque converter and geared at 6.8.  Bob apparently has lots of other homebuilt projects too... Hey Bob, whatya waitin' for? Let's see what else ya got.

Bob Magill and The American Racer

I have been hunting for a certain book for a number of years now, the book in question is American Racer by Stephen Wright, in particular volume 1, American Racer, 1900-1940, published at the authors own expense in 1979.

There are currently two copies on e-bay, one at £285 the other at £395! I guess it's a book that is rare and sought after, so much so that it has recently been reprinted in the USA by Megden Publishing Co, but still costs $125 to purchase and post to the UK. It looks like I'm going to have to bite the bullet though because the book really is worth owning for a student of vintage bike racing like me.

The book has been described as containing "indispensable information and many rare photos" and also as "a book handsome enough to rest on anyone’s coffee table". The author was also quite a charachter himself. His occupation at the time of writing the book was restoring and purchasing early American bikes for Steve McQueen’s collection... Oh yeah!

It is the amazing photographs that really bring the book to life though. One of the photographers credited for the bulk of the photographs in the 2nd volume is "Magill".

Bob Magill was a talented photographer who mainly worked in California during the late 1940s using a Kodak Medalist and several other medium-format cameras. He was also an accomplished machinist, he worked on the Apollo Space programme during the 1960s, built houses and worked in a Coast Guard sea-and-air-rescue unit during WW2. He was also full of tremendous stories that could be backed up with the prints he carried with him. Magill, like many photography purists of that era, could never get his head around the reasons why the news photography industry dropped medium-format cameras in preference for 35mm. "I can't understand why fellas use 35mm. The frame is so small, it's like shooting through a microscope". I wonder what he'd make of todays digital kit?

To get a feel for some of the wonderfully evocative and immensely detailed images that Bob Magill will be remebered for, here's a selection of his photographs that were reproduced for posterity on SuperbikePlanet courtesy of Dean Adams, who also provided the basis of the information on Bob Magill.

Actor and motorcycle racer Keenan Wynn (with cigar) out for a ride with his motorcycling mates.

Don and Marge Fera on a real 1940s American Harley-D Racer

Floyd Emde at the start of the 1940 Oakland 200 mile race.

Stripped down British Bikes on the start line at Lincoln Park.

The start line at Riverside in 1949

An Unknown "American Racer" at speed.

"Featherweight Industrial Art"

Just saw this ex-Ryan Fisher JAWA 888 SPEEDWAY BIKE for sale at Adventure Rider

Powder-coated frame. comes with some sprockets, clutch discs, Industry Speedway approved muffler and black/white JAWA covers...
FloridaSteve at Motorcycle Picture of The Day thinks it's a wicked little number... and I love his description of the bike as being... "like featherweight Industrial Art"
Go On... race a bike with NO BRAKES!!!

$2500 ..... KILLER DEAL (local pick-up only!)

SPRINGFIELD MILE 2010

Hot off the press from Poppa Wheelie... "JAKE JOHNSON WINS SPRINGFIELD MILE"

Jake Johnson blitzed the opposition on the Zanotti Harley at the Springfield Mile. Kawasaki mounted Bryan Smith stunned the Flat Track World by beating Kenny Coolbeth jnr on the factory H-D into third place.

Thanks Poppa Wheelie, I wish I was there to take it all in too.

Jake Johnson wins the Springfield Mile

Bryan Smith's Werner-Springsteen Kawasaki 650 Ninja based twin surprised just about everyone with a superb 2nd place. Read more about the Kawasaki here

INDY 500... The Brits are Rockin' !

Temporary transmission is resumed, I'll be posting a few things of interest via my daughters laptop for the next few weeks. Here's something that made me smile today....Dario Franchitti of Scotland has won the Indy 500 for the 2nd time. Following hot on his heels were Dan Wheldon and rookie Alex Lloyd ,a clean sweep for Great Britain! Yeehah!

Dario Franchitti celebrates his 2nd Indy 500 success...

followed by fellow Brit Dan Wheldon in 2nd place and...

...an impressive 3rd place for British rookie Alex Lloyd

TEAM USA from Lonigo, Italy

As an update to my earlier post on the return of the USA to the Speedway World Cup qualifiers... here's a couple of photo's from the event.

The USA team line up before the meeting.

l-r Tommy Hedden,  Kenny Ingalls, (mgr), Chris Kerr, Ryan Fisher and Gino Manzares (Kneeling).

Chris Kerr takes the lead.

THE AMERICANS RETURN, but the Finns are flying...

Following my earlier post on "Whatever Happened to American Speedway?", 2010 has thankfully seen the return of the USA to the Speedway World Cup, but it's been a far cry from the heady days of the 1980s. This years qualifying round was held at the Lonigo track in Italy and was eventually won by Finland, one point ahead of pre-meeting favourites Slovenia. USA finished third with the host nation bringing up the rear. According to Speedway Star reporter, Giorgio Lazzari "... The Americans were particularly impressive during practice, especially teenager Gino Manzares". Ryan Fisher battled hard with three heat wins in his 12 point total and Chris Kerr gave him solid support but the Americans battle was really lost before the action even started. Firstly, Grand Prix veteran Greg Hancock was a late withdrawal from the event and then the FIM declared that 16 year old Gino Manzares could not ride because he is below the age limit set for international meetings as set out in their regulations. It was good to see a couple of new, young riders being given their chance though, both Kenny Ingalls and Tommy Hedden have toured the UK with Steve Evans' USA Dream Team and have obviously progressed enough to be able to score points on the International scene... good on 'em and welcome back USA.

"Flyin" Ryan Fisher scored 12 points in Italy including three impressive heat wins.

Gino Manzares was impessive in practice but the FIM barred him from representing his country in the Speedwaqy World Cup as he is too young!

Stella; The New Girl in Town:

David Uhl and UHL Studios do some amazing artwork of bikes, planes and girls. This video uses time lapse photography to show how "Stella" evolved aboard her Harley-Davidson in the 1920s... There's some more amazing artwork on the UHL Studios website, take a look and be seriously impressed.

HARLEY-DAVIDSON - "PEASHOOTER"

No brakes, no gears, no problem! The Harley-Davidson “Peashooter” was a full-on racing machine. Anything that didn’t help it go faster was just dead weight that was removed in a quest for victory.

Introduced in 1926, the 350cc singles were Milwaukee's response to Indian's Prince of the same displacement. They came in two variants, an economical side-valve for general lightweight transportation, or the more ferocious over-head-valve version. Known as the 'Peashooter' because of its staccato exhaust note, the 350cc roadster engine produced 8 horsepower, while the OHV racing version produced 12 horsepower and came equipped with a magneto.

The racer gained its performance advantage thanks to special combustion chambers designed by British engineer Harry Ricardo. A design feature called a 'squish band' created turbulence in the fuel charge, resulting in a fuller burn and thereby greater horsepower. In addition, the competition Peashooter engine also featured pressure oil feed to most of the bearings and had a sodium-cooled exhaust valve. It also featured a shorter wheelbase than the roadster and weighing only 215lbs, the racing "Peashooter" possessed an excellent power-to-weight ratio too.

Although introduced in the mid-1920s, the Peashooter's heyday was the early 1930s. By this time virtually all the expensive-to-maintain banked wooden board tracks closed and the focus of American motorcycle sport shifted back towards flat-track racing where the 350cc Harley excelled in the 21' cubic inch "Class A" . Flat track racing had started in the early 1900s on half-mile and mile-long horse tracks which were loosely  surfaced, hence the alternative name of "dirt-track" racing. The "Peashooter was also exported and proved its worth on the speedway circuits of Australia and Europe.

Harley-Davidson factory rider Joe Petrali

By the mid-1930s the focus of American racing had switched to the production-based "Class C" machines and the British J.A.P. engine had replaced virtually everything in the speedway world... The "Peashooter's" day had passed.

CYCLONE- 1913-1916.

The Cyclone is probably one of the most purposeful bikes of all time and was certainly way ahead of its time in terms of engine build and performance. The bike was built by Joerns Motor Manufacturing Company of St Paul, Minnesota, USA, which itself grew out of the Thiem Manufacturing Company, an engine builder which operated from 1903 to 1911. Board-track and dirt-track motorcycle racing were big money earners in America during the early 20th century with Indian and Harley-Davidson leading the way and then Cyclone came onto the scene in 1912 with their 1000cc, over-head cam v-twin.

The bevel drive ohc engine was designed by Swedish engineer, Andrew Strand, and was possibly the most powerful motorcycle engine of the day. The motors ran very well and were very strong but the frame was really nothing more than a modified bicycle frame with an unpadded leather saddle and even bicycle pedals.

While racing a Cyclone in 1914, development engineer J.A.McNeil set a new speed record of 111 mph, beating the Excelsior of Lee Hummiston at 100mph (yes this was 1914!). The quality of the workmanship was very high in most regards, as the motors were machined to very high accuracy. Ultimately, the motors and the bikes were not as reliable as more conventional designs. Some races were lost due to mundane issues like cracked fuel tanks or broken chains, but some were lost due to exhaust valve and piston breakages.

J.A.McNeil on a Cyclone

Racing is what Cyclones did best, and the name most closely associated with them after that of designer Andrew Strand is Don Johns, perhaps the most successful of all Cyclone riders. In a 1941 magazine interview, Johns recalled some things about the legendary Cyclone... "The yellow rig attracted a great deal of attention wherever I raced it. It used special Swedish precision bearings and was very light and very powerful. The motor was so powerful that I would wear out a set of tires in just a few laps. I switched from U.S. Tires to a newly designed Goodyear and that helped. It was the first racer to turn over 5000 rpms. It had a unique sound and was often five to seven miles per hour faster than the other factory rigs."

Don Johns on his Cyclone

One legendary victory for Johns on the Cyclone was a winner-take-all one-lap race around a mile dirt track in Phoenix on November 18, 1913. The promoter offered the princely sum of $1000 to the vehicle that could lap the mile the fastest – that included planes flying just above the mile oval. Johns and the Cyclone beat the automobile ace Barney Oldfield and barnstorming pilot Lincoln Beachly to win the prize.

The Cyclone, while often the fastest motorcycle at a race, suffered from reliability problems. Johns easily turned the fastest lap times and many times built big leads only to suffer mechanical problems with the bike. The most infamous race for Johns and Cyclone was the epic 1915 Dodge City 300. A total of seven manufacturers fielded factory teams in the event. Harley-Davidson, debuting in the classic race, and Indian each had eight riders. Johns, on the Cyclone, turned laps over two mph faster than Dave Kinney’s qualifying speed in the early laps and was heavily favoured to win the race. He opened a large lead, lapping a number of riders in the first fifty miles. Then the bike began to fade and he lost the lead just before the 100-mile mark and later dropped out of the running. Johns also lead similarly in the 100-mile national at Ascot Park until the Cyclone again failed before reaching the chequered flag. Johns did win a number of shorter races on the Cyclone, including the 1 mile FAM National held in Sacramento in July of 1915.

The company owners of Cyclone had little experience or even interest in marketing, building up dealerships or service, production was slow and expensive, profits were minimal, so the owners eventually stopped production in 1915 after no more than 300 Cyclones had been built. A number of ttempts were made to revive the Cyclone. Firstly, in 1916, a Chicago businessman bought the assets and moved the machinery, partially completed bikes and all the remaining parts to Chicago, where they were stored in a warehouse. Two other investors got involved, but were unable to get the business up and running. Four years later, the left-overs were sold and moved to Cheboygan, Michigan, where a building was put up and production was set to resume. This never happened either and another move to Benton Harbor, Michigan was made. Another factory was prepared and Andrew Strand was brought in to update the design. A new Cyclone with a three-speed transmission (reportedly based on an Excelsior unit) was displayed and adverts appeared in motorcycling magazines. Again, nothing came of it. The Cyclone's last gasp came in 1923. A racer called the Reading-Standard competed in several races. As it turned out, this was a Cyclone bearing a different name on its tank. Reading-Standard (itself recently purchased by the Cleveland Motor Company), had acquired all remaining Cyclone assets and put together one last racer from left-over parts.

A painting of a 1916 Cyclone by Don Bradley

Engine: 45degree OHC V-Twin 

Capacity: 1000cc

Horsepower: 45bhp

Wheelbase: 53" (135cm)

Weight: 260lbs (118kg)

Top Speed: 110mph (177kph)

Cost: $350

HARLEY-DAVIDSON CAC SPEEDWAY MODEL - 1934

The Harley-Davidson CAC 500cc single port speedway model is very rare and not much is really known about its history. One came up for auction in Las Vegas a few years ago and the owner talked about it to Rick Newlee. It appears that there were 12 of these machines built, the whereabouts of 9 of them is known but nobody is sure what happened to the other 3. It appears that H-D factory rider Joe Petrali was the man instrumental in getting these machines built. Joe had more or less begged Harley-Davidson to build the bikes, but they were not really interested. Joe hung around the H-D plant and pestered them until they gave in to Joe's wishes on the condition that he built it himself (or hired his own people). Other conditions were that he could only use the plant on weekends and he must leave the workshop in good clean order come Monday. He also had to put the Harley-Davidson name on the bike (just in case it became a success!). After a few of the CAC machines were built and tested, Joe tried to persuade Harley-Davidson to put the CAC machines into production for a second time, however the tests did not go as well as expected and the engines didn't make the power he had hoped for. It appears that Joe had copied the British J.A.P. engines to some degree, but had a problem with the cams and the cam timing. Harley-Davidson decided not to get involved and the project ended.

Joe Petrali, also known as "Smokin' Joe" to others, left a huge mark in the world of motorcycles. His career in motorcycles spanned from the mid 20s on into the mid to late 30s riding in everything from board track races, dirt track races, land speed records and hillclimbs. Joe is part of the AMA motorcycle Hall of Fame and a full account of his successes are available to read here

Joe Petrali on his factory Harley-Davidson racer in 1925

UPDATE>>>

I recently found this publicity photograph of Walter Davidson sitting on a CAC at the model launch.

CROCKER SPEEDWAY BIKES 1931-34

Interest in European-style speedway had exploded in the USA after its introduction by Lloyd "Sprouts" Elder during 1931. Several high school sports fields in the Los Angeles area had been turned into speedway tracks during the summer vacation. Local Indian dealer, Albert "Al" Crocker was fascinated with this new sport, so, in partnership with his chief engineer Paul Bigsby, they decided to build their own speedway bike. The initial 1931 prototype was a special Crocker frame into which they installed a regular 45 cubic inch (750cc) sidevalve Indian 101 Scout engine. Satisfied with this frame design, Crocker next turned his attention to a better engine, so for the 1932 campaign several Scout engines were converted into 30.50 cubic inch (500 cc) overhead valve units.

1931 OHV Crocker Indian V-Twin

The first of the Crocker-powered overhead valve singles appeared at Emoryville Speedway in California in November 1933. Cordy Milne rode the machine in twelve races and took nine first places and one second place during the meetings held on November 11th and 14th. His brother Jack had four first places during the same two meetings. Other top riders who used the first Crocker dirt trackers were Miny Waln, Earl Farrand and Snooky Owens, so the marque was well represented.

Unfortunately for Al Crocker, the British J.A.P. powered bikes were beginning to dominate speedway in Europe and were rapidly replacing the Douglas and Rudge machines which had dominated the sport since 1928. The 40hp Crocker proved itself the equal of the Rudge, and was superior to the Harley-Davidson CAC. However, the J.A.P. machines were good for 42-43 hp, so Crocker's new baby needed further development to be competitive. He therefore had two overhead cam motorcycles built during 1934, one of which was ridden a few times by Miny Waln. The 1934 Crocker catalogue stated....
"These machines competed continually at Long Beach, San Diego, Los Angeles, and Santa Ana. In the winter they were sent to Mexico City for a series of eighteen races, where practically every event was won by a Crocker machine. Competition with the imported equipment forced the decision in favour of a newly designed power plant - a type which would have acceleration, the right power output, low cost of maintenance plus a low first cost. A single cylinder type was decided upon."

Meanwhile, Crocker's attention was turning to a long cherished dream of building the fastest road-going motorcycle in the nation - perhaps the world. Facing stiff competition from the J.A.P. engines, and not being a true factory owner, he abandoned his shop-built speedway bikes at the end of 1934 to launch the far more famous Crocker v-twins which debuted in 1936. During the speedway project, the Crocker machine shop had built between forty and fifty of the pushrod speedway motorcycles.

Key specifications of the 1934 Crocker speedway machine:

Bore: 3 1/4 in (82.55mm)

Stroke: 3 5/8 in (92.085mm)

Displacement: 30.06 cubic inches

Compression Ratio: 14 : 1

Crankpin: 1 1/8 in, drilled for oil

Main Shafts: 1 in, with 7 degree taper

Bearings: roller for mainshafts and crankpin

Valves: 1 3/4 in, set at `close angle' in `shallow domed interior'

Valve Springs: three coil springs per valve

Ignition: gear driven Lucas magneto

Carburetor: two bowl Amal

Power Peak: at 6,000 rpm

Fuel: alcohol

Frame: chrome molybdenum tubing

Gear Ratio: for 1/5 mile track, 8.75 : 1

Weight: 235 pounds

Cost: $385

Information taken from the Book "American Racing Motorcycles" by Jerry Hartfield.

ON ANY SUNDAY ...revisited (again!!)

I've been looking through some of the 1000s of images I have collected on my laptop and found these excellent photos of Steve McQueen and Bud Ekins from LIFE magazine.

They were taken during a desert race in the Mojave Desert and it just got me thinking of the first time I watched On Any Sunday, the day I discovered American Flat Track Racing... the names of Mert Lawwill and Bud Ekins have been permanently imprinted on my brain ever since. I was also at Cradley Heath speedway around 1980 when an American camera crew turned up to film Bruce Penhall in action for On Any Sunday II. I can't imagine anyone reading this will never have seen either of these films, but they're always worth viewing again and again... This is the usual review found everywhere on the 'net of the first film...

Without a doubt the quintessential motorcycle film, acclaimed filmmaker Bruce Brown explores this dizzying and intoxicating world of rugged road riders where cycles hit incredible speeds. Segueing into the grueling excitement of a muddy and murderous motocross race, we then move on to the tortuous mayhem of the Mexican 1000 off-track trial race down the Baja peninsula. It's an exhilarating experience that puts you in the driver's seat.  
Can't disagree with that, the imagery and music may be a bit dated, but the action sequences really do capture the fun and thrills.

Mert Lawwill on the slide.